Size Guide - Selene Jacket
Selene Jacket - Size Guide
Our Watts Jacket is designed to be true to size, so we recommend ordering the size you would normally wear.
We've listed out the garment's dimensions below if you'd like to compare it against an existing piece from your wardrobe. All sizes are in CM.
| Size | Chest | Length | Sleeve | Shoulder |
| 0 (XS) | 55 | 70 | 62 | 44 |
| 1 (S) | 56 | 71 | 63.5 | 46.5 |
| 2 (M) | 57 | 72 | 65 | 49 |
| 3 (L) | 58 | 73 | 66.5 | 51.5 |
| 4 (XL) | 59 | 74 | 68 | 54 |
| 5 (XXL) | 60 | 75 | 69.5 | 56.5 |
How to measure
Pick a well fitting jacket from your wardrobe and lay it flat. Then use a tape measure against each of the above dimensions like so...
Chest - Measure across the chest, around 2.5cm below the armpit
Length - Measure vertically from top to bottom, at the longest point not including the collar. This is usually the point immediately next to the collar, then go vertically down to the bottom of the garment.
Sleeve - Take a measurement from the top sleeve, from shoulder seam all the way to the edge of the sleeve including the cuff.
Shoulder - Shoulder length is measured from left seam to right seam, in a straight horizontal line
